just before the holidays i was able to install the shower base in the bathroom all that needs to be done in preperation is to cut out the waste hole this is done with the circular saw to make a square as showen below next is that the glue is applyed to the bace of the shower bace at 50mm spacings then pushed into corner then silicon is applyed at the joint to the base and wall to set in a seal then weights r placed on top to make sure the glue is at full strength.
 |
| waste hole cut with circular saw |
 |
| glue on base of shower base |
 |
| silicon on shower base |
 |
| weights |
Good work on your blog posts Raymond, you're keeping well up to date. Take another look at Braceline plasterboard and what is used for - you're a little off skew below. Remember I have a post http://louiseheaps.blogspot.com/ that goes through what you'll up to next week so take a look, also there are links there that'll help you with that BL research and the assignment parts you need to do over Easter.
ReplyDelete